TND523SS no.9005-1/8 features ? single-phase high side drive ? monolithic structure ? allows simpli ed con guration of driver circuit ? withstand voltage of 600v is assured ? fully compatible input to lsttl/cmos ? high-speed switching ? output current: 170ma source, 340ma sink ? halogen free compliance speci cations absolute maximum ratings at ta=25c (all voltage parameters are absolute voltage feferenced to gnd) parameter symbol conditions ratings unit high side floating supply voltage v h --0.3 to 625 v high side floating supply offset voltage v s v h --25 to v h +0.3 v high side output voltage v hout v s --0.3 to v h +0.3 v logic supply voltage v dd --0.3 to 25 v logic input voltage v hin --0.3 to v dd +0.3 v the maximum allowable offset voltage supply dv s /dt 50 v/ns allowable power dissipation p d 0.3 w when mounted on ceramic substrate (1200mm 2 0.8mm) 1.2 w junction temperature tj --55 to +150 c storage temperature tstg --55 to +150 c package dimensions unit : mm (typ) 7005a-013 ordering number : en9005 60811ip tkim tc-00002602 sanyo semiconductors data sheet TND523SS expd(excellent power device) single-phase high side drive application http:// semicon.sanyo.com/en/network product & package information ? package : sop8 ? jeita, jedec : sc-87, sot-96 ? minimum packing quantity : 1,000 pcs./reel packing type: tl marking block diagram 1 : no contact 2 : hin 3 : vdd 4 : gnd 5 : no contact 6 : vs 7 : hout 8 : vh sanyo : sop8 1.8 max 4.4 6.0 0.8 0.8 5.0 0.2 0.1 0.3 0.43 1.27 0.7 1.5 14 5 8 tl tnd lot no. 523 high voltage logic level shift uv circuit level shift pulse gain latch circuit uv circuit v dd gnd hin hout v s v h 3 2 4 8 7 6
TND523SS no.9005-2/8 recommend operating conditions at ta=25c parameter symbol conditions ratings unit high side floating supply voltage v h v s +10 to v s +20 v high side floating supply offset voltage v s 0 to 600 v high side output voltage v hout v s to v h v logic supply voltage v dd 10 to 20 v logic input voltage v hin 0 to v dd v ambient temperature topr --40 to +125 c ac characteristics at ta=25c (v dd =v hs =15v, c l =1000pf) parameter symbol conditions ratings unit min typ max turn-on delay time t on v s =0v 60 90 120 ns turn-off delay time t off v s =0v 55 85 115 ns turn-on rise time t r 50 80 110 ns turn-off fall time t f 20 35 55 ns dc characteristics at ta=25c (v dd =v hs =15v) parameter symbol conditions ratings unit min typ max logic ?1? input voltage v ih v dd =10 to 20v 3.0 v logic ?0? input voltage v il v dd =10 to 20v 0.8 v high-level output voltage, vbias-v o v oh v hin =v ih , i o =0a 0.1 v low-level output voltage, v o v ol v hin =v il , i o =0a 0.1 v offset supply leakage current i lk v h =v s =600v 10 a quiescent vh supply current i qh v hin =0v or v dd 70 120 a quiescent vdd supply current i qdd v hin =0v or v dd 140 230 a logic ?1? input bias current i in +v hin =v dd 20 55 a logic ?0? input bias current i in -v hin =0v 1 a v h supply undervoltage positive going threshold v huv + 7.6 8.9 9.9 v v h supply undervoltage negative going threshold v huv - 6.7 8.1 9.5 v v dd supply undervoltage positive going threshold v dduv + 7.6 8.9 9.9 v v dd supply undervoltage negative going threshold v dduv - 6.7 8.1 9.5 v output high short circuit pulsed current i o +v hout =0v, v hin =15v, pw 10 s 170 200 ma output low short circuit pulsed current i o -v hout =15v, v hin =0v, pw 10 s 340 400 ma switching time waveform de nition hout hin t r 50% 50% 90% 90% 10% 10% t on t f t off
TND523SS no.9005-3/8 switching time test circuit hout 10 f 0.1 f v dd =15v c l 0.1 f10 f hin 2 4 7 6 8 3 v h =15v v s =0v it16457 v dd , v hs -- v t on -- v dd , v hs t on -- tc turn-on delay time, t on -- ns turn-on delay time, t on -- ns case temperature, tc -- c v dd , v hs -- v t off -- v dd , v hs t off -- tc turn-off delay time, t off -- ns turn-off delay time, t off -- ns case temperature, tc -- c 50 100 200 150 10 16 20 14 18 12 0 it16461 0 50 200 100 150 --50 25 125 075 50 100 --25 it16460 0 50 200 100 150 10 16 20 14 18 12 it16459 v s =0v 0 50 200 100 150 --50 25 125 075 50 100 --25 it16458 max v s =0v v dd =v hs =15v typ min max typ min v s =0v v dd =v hs =15v max typ min v s =0v max typ min
TND523SS no.9005-4/8 v ih -- v dd v ih -- tc case temperature, tc -- c logic circuit supply voltage, v dd -- v logic "1" input voltage, v ih -- v logic "1" input voltage, v ih -- v v il -- v dd v il -- tc case temperature, tc -- c logic circuit supply voltage, v dd -- v logic "0" input voltage, v il -- v logic "0" input voltage, v il -- v v dd , v hs -- v t r -- v dd , v hs t r -- tc case temperature, tc -- c turn-on rise time, t r -- ns turn-on rise time, t r -- ns v dd , v hs -- v t f -- v dd , v hs t f -- tc turn-off fall time, t f -- ns case temperature, tc -- c turn-off fall time, t f -- ns 0 2.0 1.5 0.5 1.0 it16469 10 12 18 20 16 14 max 0 0.5 2.0 1.0 1.5 --50 25 125 075 50 100 --25 it16468 v dd =10v to 20v max 10 12 18 20 16 14 0 1 2 5 4 3 it16467 min 0 1 5 2 3 4 --50 25 125 075 50 100 --25 it16466 v dd =10v to 20v min 10 16 20 14 18 12 it16465 0 20 40 100 60 80 c l =1000pf 0 20 120 100 40 60 80 --50 25 125 075 50 100 --25 it16464 10 14 20 16 18 12 0 100 200 50 150 it16463 c l =1000pf 0 50 200 100 150 --50 25 125 075 50 100 --25 it16462 c l =1000pf v dd =v hs =15v max typ min max typ min c l =1000pf v dd =v hs =15v max typ min max typ min
TND523SS no.9005-5/8 i lk -- v h i lk -- tc case temperature, tc -- c offset supply leakage current, i lk -- a offset supply leakage current, i lk -- a high side floating supply voltage, v h -- v v hs -- v i qh -- v hs i qh -- tc case temperature, tc -- c quiescent v h supply current, i qh -- a quiescent v h supply current, i qh -- a v hs -- v v oh -- v hs v oh -- tc case temperature, tc -- c high-level output voltage, v oh -- mv high-level output voltage, v oh -- mv v ol -- v hs v hs -- v v ol -- tc case temperature, tc -- c low-level output voltage, v ol -- mv low-level output voltage, v ol -- mv v hin =0v or v dd 10 14 20 16 18 12 it16477 max typ 0 25 50 100 75 125 175 150 200 0 25 225 200 50 100 150 75 125 175 --50 25 125 075 50 100 --25 it16476 v hin =0v or v dd v hs =15v typ max 0 100 400 600 300 500 200 it16475 v h =v s =600v 0 20 40 80 60 100 120 max it16474 10 16 20 14 18 12 it16473 v hin =v il i o =0a 0 25 50 75 100 125 150 175 200 0 25 50 75 100 125 150 175 200 max --50 25 125 075 50 100 --25 it16472 max v hin =v il i o =0a 10 14 20 16 18 12 0 25 75 50 200 175 125 100 150 0 25 75 50 200 175 125 100 150 it16471 max v hin =v ih i o =0a --50 25 125 075 50 100 --25 it16470 max v hin =v ih i o =0a 0 40 20 120 60 80 100 --50 25 125 075 50 100 --25 v h =v s =600v max
TND523SS no.9005-6/8 i in (--) -- v dd i in (--) -- tc case temperature, tc -- c logic circuit supply voltage, v dd -- v logic "0" input bias current, i in (--) -- a logic "0" input bias current, i in (--) -- a v huv (+) -- tc v huv (--) -- tc case temperature, tc -- c case temperature, tc -- c v h supply undervoltage positive going threshold, v huv (+) -- v v h supply undervoltage negative going threshold, v huv (--) -- v i qdd -- v dd i qdd -- tc case temperature, tc -- c quiescent v dd supply current, i qdd -- a quiescent v dd supply current, i qdd -- a logic circuit supply voltage, v dd -- v i in (+) -- v dd i in (+) -- tc logic circuit supply voltage, v dd -- v case temperature, tc -- c logic "1" input bias current, i in (+) -- a logic "1" input bias current, i in (+) -- a 6 7 8 9 10 11 it116484 --50 0 25 75 125 50 100 --25 max min typ 6 7 8 9 10 11 --50 0 25 75 125 50 100 --25 it16485 min typ max 0 1 2 3 4 5 it16483 max 10 14 20 16 18 12 v hin =v dd 0 1 2 3 4 5 it16482 --50 0 25 75 125 50 100 --25 v hin =0v v dd =15v max it16481 0 20 40 60 80 100 typ 10 14 20 16 18 12 0 100 20 60 40 80 --50 25 125 075 50 100 --25 it16480 typ max v hin =v dd =15v 0 50 100 150 200 250 400 300 350 v hin =0v or v dd 10 14 20 16 18 12 it16479 max typ 0 50 400 100 200 300 150 250 350 --50 25 125 075 50 100 --25 it16478 typ max v hin =0v or v dd v hin =v dd max
TND523SS no.9005-7/8 p d -- ta ambient temperature, ta -- c allowable power dissipation, p d -- w i o (--) -- v hs v hs -- v i o (--) -- tc output low short circuit pulsed current , i o (--) -- ma output low short circuit pulsed current , i o (--) -- ma case temperature, tc -- c v dduv (+) -- tc v dduv (--) -- tc case temperature, tc -- c case temperature, tc -- c v dd supply undervoltage positive going threshold, v dduv (+) -- v v dd supply undervoltage negative going threshold, v dduv (--) -- v i o (+) -- v hs v hs -- v i o (+) -- tc output high short circuit pulsed current , i o (+) -- ma output high short circuit pulsed current , i o (+) -- ma case temperature, tc -- c dv s/ dt -- tc maximum allowable offset voltage supply, dv s / dt -- v/ns case temperature, tc -- c it16493 0 --40 40 --20 20 0 80 100 60 120 160 140 0.4 0.1 0.2 0.3 10 12 16 20 18 14 0 200 800 600 400 it16489 0 200 400 600 800 it16491 --50 0 25 75 125 50 100 --25 typ ( v hs =20v) v hout =v hs v hin =0v pw 10 s typ (v hs =15v) typ (v hs 10v) 10 12 16 20 18 14 0 100 400 300 200 it16488 0 100 200 300 400 it16490 --50 0 25 75 125 50 100 --25 typ (v hs =20v) v hout =0v v hin =v in pw 10 s typ (v hs =15v) typ (v hs =10v) 6 7 8 9 10 11 it116486 --50 0 25 75 125 50 100 --25 max min typ 6 7 8 9 10 11 --50 0 25 75 125 50 100 --25 it16487 min typ max v hout =0v v hin =v in pw 10 s min typ min typ v hout =v hs v hin =0v pw 10 s 1.0 0.1 7 5 100 10 7 5 3 2 3 2 7 5 3 2 it16492 --50 0 25 75 125 50 100 --25 max
TND523SS no.9005-8/8 ps this catalog provides information as of june, 2011. speci cations and information herein are subject to change without notice. any and all sanyo semiconductor co.,ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, av equipment, communication device, office equipment, industrial equipment etc.). the products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. if you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. if there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer ' s products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer ' s products or equipment. sanyo semiconductor co.,ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo semiconductor co.,ltd. products described or contained herein. sanyo semiconductor co.,ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. it is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo semiconductor co.,ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of sanyo semiconductor co.,ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo semiconductor co.,ltd. product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of sanyo semiconductor co.,ltd. or any third party. sanyo semiconductor co.,ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. p d -- ta ambient temperature, ta -- c allowable power dissipation, p d -- w it16494 0 --40 40 --20 20 0 80 100 60 120 160 140 1.4 0.2 0.6 1.0 0.4 0.8 1.2 when mounted on ceramic substrate (1200mm 2 0.8mm)
|
